home *** CD-ROM | disk | FTP | other *** search
- Path: snail.stack.urc.tue.nl!not-for-mail
- From: jaco@stack.urc.tue.nl (Jaco Schoonen)
- Newsgroups: comp.sys.amiga.graphics
- Subject: Re: CyberVision 64 HELP NEEDED!
- Date: 11 Feb 1996 02:13:24 +0200
- Organization: MCGV Stack, Eindhoven University of Technology, the Netherlands.
- Distribution: world
- Message-ID: <4fjcb4$fq4@snail.stack.urc.tue.nl>
- References: <zool.0jyo@klinja.fipnet.fi>
- NNTP-Posting-Host: snail.stack.urc.tue.nl
- X-Newsreader: TIN [version 1.2 PL2]
-
- Lauri Ahonen (zool@klinja.fipnet.fi) wrote:
-
- : I just got my CyberVision 64/4mb graphics card, and I have some problems with
- : it...
-
- : a) Since the CyberGraphics software was installed, I can't actually do
- : anything with my computer. It gets stuck by gurus and crashs too often and
- : especially when changing screens... but even the use of MenuBars causes crash!
-
- : I have removed _every_ WBstartup/User-startup application, but no effect..
- : Even the ProtoGenics lite, which came with the card isn't stable... It crashes
- : soon, at the latest, it crashes when changing the buffer-window size. In
- : photogenics lite, the graphics get mixed up, and the machine gurus...
-
- : I have got A4000/040 with 8mb:s of fast, and buster revision 9
-
- What resolutions did you define? CVMode will let you overclock your CV.
- Especially in 24 bit you get trouble when defining >50 Mhz pixel clock.
- If I do so, I get the behaviour you justr described...
- In 8 bit everything should be fine though.
- In 16 bit don't go beyond 100Mhz or so...
-
- Hope this helps,
-
- --
- Jaco Schoonen
- (jaco@stack.urc.tue.nl)
-